Figure 7.6-1b. Mounting configuration dimensions (80 pin I/O connector)
28
Product Manual - Hawk 1LP Family SCSI-2 (Volume 1), Rev. C
______________________________________________________________________________________
A
F
D
E
[1]
[3]
B
G
[1] Mounting holes three on each side, 6-32 UNC.
Max screw length into side of drive 0.15 in. (3.81 mm).
Screw tightening torque 6.0 in-lb (.675 NM) max with
minimum thread engagement of 0.12 in. (3.05 mm).
[2] Mounting holes four on bottom, 6-32 UNC. Max
screw length into bottom of drive 0.20 in. (5.08 mm).
Screw tightening torque 6.0 in-lb (.675 NM) max with
minimum thread engagement of 0.12 in. (3.05 mm).
[3] Power and interface connectors can extend
past the "A" dimension by 0.020 in. (.51 mm).
[4] Connector is centered on drive within
±0.020 in. (.508 mm).
Inches
A
B
C
D
E
F
G
H
J
K
L
145.80
101.60
25.40
60.00
15.75
101.60
6.35
44.45
95.25
60.20
4.597
J
H
K
[2]
5.74
4.00
1.00
2.362
.620
4.000
.250
1.750
3.750
2.370
0.181
± .010
± .010
+ .026
– .010
± .010
± .010
± .010
+ .010
– .005
± .010
± .010
± .010
+ .018
– .013
± .25
± .25
+ .66
– .25
± .25
± .25
± .25
+ .25
– .12
± .25
± .25
± .25
+ .45
– .33
Notes:
Millimeters
C
L
Connector Centerline
[5]
Pin 1
