Seagate ST300MM0048, Product Manual

Page: 46 / 57

Seagate Enterprise Performance 10K HDD v8 Product Manual, Rev. A 45
[1] Seagate Enterprise Performance 10K HDD drives can format to 512, 520, 528 (512 native).
[2] Warning. Power loss during flash programming can result in firmware corruption.
This usually makes the drive inoperable.
[3] Reference Mode Sense command 1Ah for mode pages supported.
[4] Y = Yes. Command is supported.
N = No. Command is not supported.
A = Support is available on special request.
[5] Approximately 1.5 increase in time to complete this command for a SED drive versus a non-SED drive of the same capacity.
[6] Write alignment counters supported.
[7] Mode Fh is the only activation method supported with mode Eh
Write and Verify (12) AEh N
Write and Verify (16) 8Eh Y
Write and Verify (32) 7Fh/000Ch Y (Type 2 PI only)
Write Buffer (modes 0, 2, supported) 3Bh Y (non-SED drives only)
Write Buffer 3Bh
Firmware Download option (modes 5, 7, Dh, Eh and Fh)
[7]
Y
Write Long (10) 3Fh Y
Write Long (16) 9Fh/11h Y
Write Same (10)
[5]
41h Y
PBdata N
LBdata N
Write Same (16)
[5]
93h Y
Write Same (32) 7Fh/000Dh Y (Type 2 PI only)
XDRead 52h N
XDWrite 50h N
XPWrite 51h N
Table 7 Supported commands
Command name Command code Supported