Seagate Enterprise Performance 10K HDD v8 Product Manual, Rev. A
7
1.0
Scope
This manual describes Seagate
®
Enterprise Performance 10K HDD v8 (Serial Attached SCSI) disk drives.
Seagate Enterprise Performance 10K HDD drives support the SAS Protocol specifications to the extent described in this manual. The
SAS Interface Manual
(part number 100293071) describes the general SAS characteristics of this and other Seagate SAS drives. The
Self-Encrypting Drive Reference Manual, part number 100515636, describes the interface, general operation, and security features
available on Self-Encrypting Drive models.
Product data communicated in this manual is specific only to the model numbers listed in this manual. The data listed in this manual
may not be predictive of future generation specifications or requirements. If integrators are designing a system which will use one of
the models listed or future generation products and need further assistance, please contact the Field Applications Engineer (FAE) or
our global support services group as shown on “Seagate® Technology Support Services” on page 6.
Unless otherwise stated, the information in this manual applies to standard and Self-Encrypting Drive models.
Standard Models
Self-Encrypting Drive
(SED) Models
512 Native
ST600MM0208
ST600MM0218
ST300MM0048
ST300MM0058
Note
Previous generations of Seagate Self-Encrypting Drive models were called Full Disk Encryption (FDE) models
before a differentiation between drive-based encryption and other forms of encryption was necessary.
Note
at Rest” based on the standards defined by the Trusted Computing Group (see
www.trustedcomputinggroup.org
).
