Seagate SKYHAWK AI ST20000VE002, Product Manual

Page: 21 / 31

Seagate SkyHawk AI Serial ATA Product Manual, Rev. C 20
3.4 Drive mounting
Users can mount the drive in any orientation using four screws in the side-mounting holes or four screws in the bottom-mounting holes.
See
Figure 4 and Figure 5 for drive mounting dimensions. Follow these important mounting precautions when mounting the drive:
• Allow a minimum clearance of 0.030 in (0.76mm) around the entire perimeter of the drive for cooling.
• Use only 6-32 UNC mounting screws.
• The screws should be inserted no more than 0.140 in (3.56mm) into the bottom or side mounting holes.
• Do not overtighten the mounting screws (maximum torque: 6 in-lb).
3.4.1 Mechanical specifications
Refer to Figure 4 and Figure 5 for detailed mounting configuration dimensions. See Section 3.4 , “Drive mounting.”
Figure 4. Mounting configuration dimensions 8TB models (Option 1)
Weight: 8TB models 1.587 lb 720g
Note
These dimensions conform to the Small Form Factor Standard documented in
SFF-8301 and SFF-8323, found at
www.sffcommittee.org
Note The image is for mechanical dimension reference only and may not represent the actual drive.
2X 1.750±.010
2X 3.000±.010
3X 3.750±.010
3X.125±.010
2X 1.432±.020
2X 1.625±.020
.814±.020
CL OF DRIVE CL OF CONN
3X .250±.010
BOTH SIDES
1.122±.020
1.638±.010
4.000±.010
1.028 MAX
[26.10MM]
.138±.015
2.000
CL OF DRIVE
5.787 MAX
[147.00 MM]
4.000±.010
6X 6-32 UNC-2B
.14 THREAD DEPTH
0.160 ± 0.10 x 90
MAX TORQUE: 6 IN-LBS
6X 6-32 UNC-2B
.14 THREAD DEPTH
0.169 ± 0.16 x 90
MAX TORQUE: 6 IN-LBS
BREATHER HOLE
DO NOT COVER