Seagate Nytro XP6302 Flash Accelerator Cards User Guide, Rev. E
16
www.seagate.com
Safety, Standards, and Compliance
3.2
Safety, Standards, and Compliance
3.3
Standards
This drive is recognized in accordance with UL 60950-1, CSA 60950-1 and IEC/EN60950- 1 as tested by UL.
3.3.1
Regulatory Model Number
The following regulatory Model Numbers represent all features and configurations in this series:
Regulatory Model Numbers: 25632 and ST25632
3.3.2
Agency and Safety Certifications
Each Solid State Drive ("drives") has a product label that includes certifications that are applicable to that specific
drive. The following information provides an overview of requirements that may be applicable to the drive.
3.3.2.1
European Union (EU) CE Marking Requirements
Drives that display the CE mark comply with the European Union (EU) requirements specified in the Electromagnetic
Compatibility Directive (2014/30/EU) put into force on 20 April 2016. Testing is performed to the levels specified by
the product standards for Information Technology Equipment (ITE). Emission levels are defined by EN 55032:2012,
Class B and the immunity levels are defined by EN 55024:2010.
The drives also meet the requirements of The Low Voltage Directive (LVD) 2014/35/EU.
Seagate drives are tested in representative end-user systems. Although CE-marked Seagate drives comply with all
relevant regulatory requirements and standards for the drives, Seagate cannot guarantee that all system-level
products into which the drives are installed comply with all regulatory requirements and standards applicable to the
system-level products. The drive is designed for operation inside a properly designed system (e.g., enclosure designed
for the drive), with properly shielded I/O cable (if necessary) and terminators on all unused I/O ports. Computer
manufacturers and system integrators should confirm EMC compliance and provide CE marking for the system-level
products.
For compliance with the RoHS "Recast" Directive 2011/65/EU (RoHS 2),
Section 3.3.3.1.1,
Restriction of Hazardous
Substances in Electrical and Electronic Equipment
.
3.3.2.2
Australian RCM Compliance Mark
If these models have the RCM marking, they comply with the Australia/New Zealand Standard AS/NZ CISPR32 and
meet the Electromagnetic Compatibility (EMC) Framework requirements of the Australian Communication and Media
Authority (ACMA).
3.3.2.3
Canada ICES-003
If this model has the ICES-003:2016 marking it complies with requirements of ICES tested per ANSI C63.4-2014.
