Seagate Nytro XF1230-1A0240, Product Manual

Page: 6 / 26

Seagate Nytro XF1230 SATA SSD Product Manual, Rev. H 6
www.Seagate.com Introduction
1. Introduction
The Seagate® Nytro® XF1230 SSDs provide high reliability and sustained performance for enterprise Server and
Storage products. The Nytro XF1230 series offers SATA interface, fully compatible with SATA 3.1 6.0Gb/s.
Table 1 Nytro XF1230 Card Features
Feature Description
Capacity
 240, 480, 960, 1920 GB
Certifications,
Eco-Compliance
 CE, UL, FCC, RCM, BSMI, KCC, Microsoft WHQL, SATA-IO
 China RoHS2, Taiwan RoHS
Dimension
 (69.85±0.25) x (100±0.25) x (Max. 7) mm SSD Outer case can support suitable Z-height
for various host situations.
Endurance
 1 Drive Write Per Day (DWPD) for higher lifetime endurance. See Table 10, Endurance , on page 10 .
Form
 2.5 Inch Standard SSD
Interface
Compliance
 Fully compliant with SATA revision 3.1, compatible with SATA 6.0Gb/s interface rates.

Fully compliant with ATA-8/ACS-3 Standard.
 PIO, DMA, UDMA (up to 6, dependent on host) supported.
 SATA 6.0Gb/s Native Command Queuing (NCQ): up to 32 commands.
 SMART command transport (SCT) technology.
 Data Set Management Command Trim support.
Latency
 Read: 140 μs (Typ.)
 Write: 60 μs (Typ.)
Latency measured with transfer size 4 KB and
queue depth of 1 on a random workload, and
based on high density (1920 GB).
NAND

16 nm
Performance
Random
(Sustained)
 4 KB Read: Up to 98K IOPS
 4 KB Write: Up to 16.8K IOPS
 8 KB Read: Up to 58K IOPS
 8 KB Write: Up to 8K IOPS
Actual performance may vary depending on
use conditions and environment.
See Section 2.2, Performance , on page 8 .
Typical I/O performance numbers measured
with a queue depth of 32, write cache enabled,
6Gb/s SAS chipset port, and the Intel RST driver.
Performance
Sequential
(128 KB
Sustained)

Read: Up to 560MB/s
 Write: Up to 505MB/s
Actual performance may vary depending on
use conditions and environment.
See Section 2.2, Performance , on page 8 .
Typical I/O performance numbers as measured
with a queue depth of 32, write cache enabled,
6Gb/s SAS chipset port, and the Intel RST driver.
Power
Consumption
 Active: Up to
5.7
W
 Idle: Up to 1.0 W
See Section 2.3, Power , on page 9 .
RMS Average.
NOTE This specification is for the 1920 GB drive;
smaller capacity drives have lower active
power.
Power Loss Protection
Power
Management

2.5 inch: 5 V SATA Supply
 OS-aware hot plug/removal
Power On Ready

Normal shut down: 5 s
 Unsolicited shut down: 21 s
Based on High Density (1920 GB).