manualshive.com logo in svg

Seagate Momentus ST160LT003 - 9YG141, Product Manual

Share
Download
Seagate Momentus ST160LT003 - 9YG141 Product Manual Download Page 20

14

Momentus Thin Product Manual, Rev. E

3.13

Reliability 

Measurement type

Specification

Nonrecoverable read errors

1 per 10

14

 bits read, max

Annualized Failure Rate (AFR)

<0.48%

Load/Unload (U/UL)

 

 

25°C, 50% relative humidity

 

 

 

32°C, 80% relative humidity 

 

5°C, 80% relative humidity 

 

5°C, 10% relative humidity 

 

55°C, 16% relative humidity 

 

 

600,000 software-controlled power on/off cycles

 

20,000 hard power on/off cycles

 

 

600,000 software-controlled power on/off cycles

 

20,000 hard power on/off cycles

 

 

Warranty

To determine the warranty for a specific drive, use a web browser to access the

 

following web page:

 

http://www.seagate.com/www/en-us/support/warranty_&_returns_assistance

 

You will be asked to provide the drive serial number, model number (or part number) 

and country of purchase. After submitting this information, the system will display the 

warranty information for your drive.

 

3.14

Agency certification

3.14.1

Safety certification

These  products  are  certified  to me et  the r equirements  of UL60 950-1,  CSA60950-1  and  EN60950  and  so 

marked as to the certify agency.

3.14.2

Electromagnetic compatibility

Hard drives that display the CE mark comply with the European Union (EU) requirements specified in the Elec-

tromagnetic Compatibility Directive (2004/108/EC) as put into place 20 July 2007. Testing is performed to the 

levels  specified  by  the  product  standards  for  Information  Technology  Equipment  (ITE).  Emission  levels are 

defined by EN 55022, Class B and the immunity levels are defined by EN 55024.

Drives are tested in representative end-user systems. Although CE-marked Seagate drives comply with the 

directives when used in the test systems, we cannot guarantee that all systems will comply with the directives. 

The drive is designed for operation inside a properly designed enclosure, with properly shielded I/O cable (if 

necessary) and terminators on all unused I/O ports. Computer manufacturers and system integrators should 

confirm EMC compliance and provide CE marking for their products.

Korean RRL

If these drives have the Korean Communications Commission (KCC) logo, they comply with paragraph 1 of 

Article 11 of the Electromagnetic Compatibility control Regulation and meet the Electromagnetic Compatibility 

(EMC)  Framework  requirements  of  the  Radio  Research  Laboratory  (RRL)  Communications  Commission, 

Republic of Korea.

These  drives  have  been  tested  and  comply  with  the  Electromagnetic  Interference/Electromagnetic 

Susceptibility (EMI/EMS) for Class  B products. Drives are  tested in a representative, end-user system by a 

Korean-recognized lab.
• Certificate number:

STX-MomentusThin (B)

• Trade name or applicant:

Seagate Technology LLC

• Certificate date:

17 September 2009

• Manufacturer/nationality:

USA, Singapore and China

Summary of Contents for Momentus ST160LT003 - 9YG141









































Reviews:

No comments

Brands by name

Popular brands

Load more brands