Seagate MOMENTUS 42.2 ST9100822A, Product Manual

Page: 19 / 48

Momentus 42.2 Product Manual, Rev. A 9
2.9.1.1 Typical current profile
Figure 2. Typical 5V startup and operation current profile
2.9.2 Conducted noise
Input noise ripple is measured at the host system power supply across an equivalent 15-ohm resistive load on
the +5 volt line.
Using 5-volt power, the drive is expected to operate with a maximum of 100 mV peak-to-peak square-wave
injected noise at up to 10 MHz.
Note. Equivalent resistance is calculated by dividing the nominal voltage by the typical RMS read/write current.
2.9.3 Voltage tolerance
Voltage tolerance (including noise):
5V ± 5%
+5 V o lt C u r r e n t d u r in g s p in d le s tar t -- T yp ical A m p e r e s
-0.2
0.0
0.2
0.4
0.6
0.8
1.0
-0.5 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5
S e co n d s
A m p s