Seagate Medalist 2160N (ST52160N), Product Manual

Page: 23 / 138

1.14 Electromagnetic Compliance for the European
Union
This model has the CE Marking, signifying that it complies with the
European Union requirements of the Electromagnetic Compatibility Di-
rective 89/336/EEC of 03 May 1989 as amended by Directive 92/31/EEC
of 28 April 1992 and Directive 93/68/EEC of 22 July 1993.
Seagate
®
uses an independent laboratory to confirm compliance to the
above directives. The drive was tested in a representative system for
typical applications. The selected system represents the most popular
characteristics for test platforms.
The system configurations include:
•
486, Pentium, and PowerPC microprocessors
•
3.5-inch floppy disc drive
•
Keyboard
•
Monitor/display
Although the test system with this Seagate model complies to the
directives, we cannot guarantee that all systems will comply. The com-
puter manufacturer or system integrator will confirm EMC compliance
and provide CE Marking for their product. The drive is not meant for
external uses (without properly designed enclosure, shielded I/O cable,
etc.), and a terminator should be used on all unused I/O ports.
1.15 FCC verification
The Medalist Pro SCSI interface drives are intended to be contained
solely within a personal computer or similar enclosure (not attached to
an external device). As such, a drive is considered to be a subassembly
even when individually marketed to the customer. As a subassembly, no
Federal Communications Commission authorization, verification or cer-
tification of the device is required.
Seagate Technology, Inc. has tested the drive in an enclosure as
described above to ensure that the total assembly (enclosure, disc drive,
motherboard, power supply, etc.) does comply with the limits for a
Class B computing device, pursuant to Subpart J of Part 15 of the FCC
rules. Operation with noncertified assemblies is likely to result in interfer-
ence to radio and television reception.
Medalist Pro 2160N/ 2160WC Product Manual, Rev. A 13