Seagate FireCuda Product Manual, Rev. A
8
*
All specifications above are based on native configurations.
**
One GB equals one billion bytes and 1TB equals one trillion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment
and formatting.
*** During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase acoustic and power to operational levels.
‡
Hybrid time-to-ready specification assumes all needed data files are pinned to flash, Windows 8 environment, and fast BIOS implemented.
2.2
Formatted capacity
*One GB equals one billion bytes and 1TB equals one trillion bytes when referring to hard drive capacity. Accessible capacity may vary depending on
operating environment and formatting.
Temperature gradient
20°C per hour max (operating)
30°C per hour max (non-operating)
Relative humidity
5% to 95% (operating)
5% to 95% (non-operating)
Relative humidity gradient (max)
30% per hour
Wet bulb temperature (max)
26°C (operating)
29°C (non-operating)
Altitude, operating
–304m to 3048m
(–1000 ft to 10,000 ft)
Altitude, non-operating
(below mean sea level, max)
–304m to12,192m
(–1000 ft to 40,000+ ft)
Operational shock (max)
80 Gs at 2ms
Non-operational shock (max)
300 Gs at 2ms
350 Gs at 2ms
Vibration, operating
2Hz to 22Hz: 0.25 Gs, Limited displacement
22Hz to 350Hz: 0.50 Gs
350Hz to 500Hz: 0.25 Gs
Vibration, non-operating
5Hz to 22Hz: 3.0 Gs
22Hz to 350Hz: 3.0 Gs
350Hz to 500Hz: 3.0 Gs
Drive acoustics, sound power
Idle***
2.4 bels (typical)
2.6 bels (max)
2.2 bels (typical)
2.4 bels (max)
Seek
2.6 bels (typical)
2.7 bels (max)
2.4 bels (typical)
2.5 bels (max)
Non-recoverable read errors
1 per 10
14
bits read
Annualized Failure Rate (AFR)
<1.0% based on 2400 POH
Rated Workload
Average annualized workload rating: <55 TB/year.
The AFR specification for the product assumes the I/O workload does not exceed
the average annualized workload rate limit of 55 TB/year. Workloads exceeding the
annualized rate may degrade the product AFR and impact reliability as experienced
by the particular application. The average annualized workload rate limit is in units
of TB per calendar year.
Warranty
To determine the warranty for a specific drive, use a web browser to access the
following web page:
http://www.seagate.com/support/warranty-and-replacements/
From this page, click on “Is my Drive under Warranty”. Users will be asked to provide
the drive serial number, model number (or part number) and country of purchase.
The system will display the warranty information for the drive.
Load/Unload cycles (25°C, 50% rel. humidity)
300,000
Supports Hotplug operation per the
Serial ATA Revision 3.2 specification
Yes
Model
Formatted capacity*
Guaranteed sectors
Bytes per sector
ST2000DX002
2000GB
3,907,029,168
4096
ST1000DX002
1000GB
1,953,525,168
Table 1
Drive specifications summary for 2TB and 1TB models (continued)
Drive Specification*
ST2000DX002
ST1000DX002
