17
5. Complete the following actions to verify the CMA bracket installation:
Figure 22 Proper installation of the CMA bracket assembly
a. Verify the outer blue spring of the CMA bracket assembly securely clips to the CMA B bracket on the outer rail and that
the inner blue spring securely clips to the CMA A bracket.
b. Verify that all cable holders open upward and that you can read the embossed name King Slide when examining the
top of each cable retainer.
6. After fully retracting the chassis, tug on the CMA bracket to make sure you properly and securely installed it.
7. Install the crossbar by snapping each captive thumbscrew into the lower of the two available holes, twisting to the right to
tighten them and stabilize the rails.
Figure 23 Direction to tighten crossbar thumbscrews
8. (Optional) For non-operating transport of the rack cabinet, complete the following steps:
a. Return to the front of the rack cabinet.
b. Lower the pull handle, and then insert and tighten two (2) Truss-head screws per side in the available screwholes on
the rack ear to a torque of 35 lbf-in (3.95 N-m). The screws secure the storage enclosure against shock and vibration.
