ST43401N/ND and ST43402ND Reference Manual, Rev. C
5
Section 2. Planning the system
This section supplements the installation instructions presented in the user’s
manual (publication 83327720). To aid in configuring the drive for specific
system requirements, the following subjects are discussed:
• Guidelines for enclosure design
• Guidelines for proper air flow
• Guidelines for I/O cabling
• Using the sweep cycle function
Guidelines for enclosure design
The drive is a component for installation in an enclosure that you have
designed. The enclosure design must provide for mounting the drive and
power supply, cable routing, and cooling. See the next topic for guidelines on
providing proper cooling.
The system designer is responsible for obtaining any needed agency approv-
als such as UL, CSA, and VDE.
Figure 3 provides mounting dimensions for ST43401N/ND and ST43402ND
drives without a bezel. Figure 4 provides the same information for ST43401N/
ND drives with the optional bezel attached. As described in the user’s manual,
the drive can be mounted using either side-mounting screws or bottom-
mounting screws.
Summary of Contents for Elite ST43402ND
Page 1: ...Elite Disc Drive ST43401N ND ST43402ND Reference Manual...
Page 8: ......
