Seagate Cheetah ST3146854 User Manual Download Page 14 | Manualshive

Page: 14 / 108

background image

4

Cheetah 15K.4 SCSI Product Manual, Rev. D

2.2

Electromagnetic compliance

Seagate uses an independent laboratory to confirm compliance to the directives/standard(s) for CE Marking
and C-Tick Marking. The drive was tested in a representative system for typical applications. The selected sys-
tem represents the most popular characteristics for test platforms. The system configurations include:

• Typical current use microprocessor

• 3.5-inch floppy disc drive

• Keyboard

• Monitor/display

• Printer

• External modem

• Mouse

Although the test system with this Seagate model complies to the directives/standard(s), we cannot guarantee
that all systems will comply. The computer manufacturer or system integrator shall confirm EMC compliance
and provide CE Marking and C-Tick Marking for their product.

Electromagnetic compliance for the European Union

If this model has the CE Marking it complies with the European Union requirements of the Electromagnetic
Compatibility Directive 89/336/EEC of 03 May 1989 as amended by Directive 92/31/EEC of 28 April 1992 and
Directive 93/68/EEC of 22 July 1993.

Australian C-Tick

If this model has the C-Tick Marking it complies with the Australia/New Zealand Standard AS/NZS3548 1995
and meets the Electromagnetic Compatibility (EMC) Framework requirements of Australia’s Spectrum Man-
agement Agency (SMA).

Korean MIC

If this model has the Korean Ministry of Information and Communication (MIC) logo, it complies with paragraph
1 of Article 11 of the Electromagnetic Compatibility (EMC) Control Regulation and meets the Electromagnetic
Compatibility Framework requirements of the Radio Research Laboratory (RRL) Ministry of Information and
Communication Republic of Korea.

This drive has been tested and complies with the Electromagnetic Interference/Electromagnetic Susceptibility
(EMI/EMS) for Class B products.

Taiwanese BSMI

If this model has the Chinese National Standard (CNS) 13438 marking, it complies with Chinese National Stan-
dard (CNS) 13438 and meets the Electromagnetic Compatibility (EMC) Framework requirements of the Tai-
wanese Bureau of Standards, Metrology, and Inspection (BSMI).

«
...
12
13
14
15
16
...
»

Summary of Contents for Cheetah ST3146854













































































































Reviews:

No comments

Related manuals for Cheetah ST3146854

Premier 23231GK

Brand: ABSCO SHEDS Pages: 25

Brand: ABSCO SHEDS Pages: 23

Brand: ABSCO SHEDS Pages: 37

Brand: ABSCO SHEDS Pages: 40

Brand: ABSCO SHEDS Pages: 18

Brand: ABSCO SHEDS Pages: 22

Brand: G-Technology Pages: 51

Brand: Rocsecure Pages: 10

Brand: Dell EMC Pages: 70

MY PASSPORT EDGE

Brand: Western Digital Pages: 77

Brand: POCKetec Pages: 19

Brand: Arrow Storage Products Pages: 73

Universal Working Table WT 840

Brand: Elektra Beckum Pages: 4

Brand: Orico Pages: 27

Brand: SanDisk Pages: 2

TERASTATION HS-D1.0TGL/R5

Brand: Buffalo Pages: 2

Big Disk USB 2.0

Brand: LaCie Pages: 47

StoreJet 18 mobile

Brand: Transcend Pages: 21

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands