Seagate Barracuda ST11950N, Product Manual

Page: 13 / 94

Barracuda 1 and 2 Product Manual, Rev. C 3
2.0 Applicable standard and
reference documentation
Seagate takes all reasonable steps to ensure that its products are certifiable
to currently accepted standards. Typical applications of these disc drives
include customer packaging and subsystem design.
Safety agencies conditionally certify component assemblies, such as the
Barracuda disc drive, based on their final acceptability in the end-use
product. The subsystem designer is responsible for meeting these condi-
tions of acceptability in obtaining safety/regulatory agency compliance in
their end-use product and certifying where required by law.
2.1 Standards
The Barracuda disc drive is a UL recognized component per UL1950, CSA
certified to CSA C22.2 No. 950-M89, and VDE certified to VDE 0805 and
EN60950.
The Barracuda disc drive is supplied as a component part. It is the respon-
sibility of the subsystem designer to meet EMC/regulatory requirements.
Engineering test characterizations of radiated emissions are available from
the Seagate safety department.
2.2 Applicable reference documents
Barracuda Disc Drive Installation Guide
Seagate part number: 83327770
SCSI-2 Interface Product Manual (volume 2)
Seagate part number: 77738479
ANSI small computer system interface (SCSI) documents
ANSI X3.131-1986 (SCSI-1)
X3T9.2/86-109 Rev. 10H (SCSI-2)
X3T9.2/91-010 Rev. 10
(SCSI-3) Parallel Interface
In case of conflict between this document and any referenced document, this
document takes precedence.