8. Insert the BarraCuda 510 SSD with the pinside going into the M.2 slot and the label side facing the top at a 30 degree
angle.
Figure 3: Seagate M.2 SSD in the M.2 Slot
9. Press the SSD down and mount it above the screw slot of the motherboard and fasten the screws.
10. Close the case or cabinet and reassemble your computer.
11. Power on your computer.
12. Start installing the Operating System on the BarraCuda 510 SSD if you want to use it as the primary drive.
Seagate BarraCuda 510 Installation Guide, Rev. A
6
