Seafloor Systems, Inc.
1 (530) 677 - 1019
Calibrating Speed Controls for Motors
1
Start with the boat and AutoNav off and the remote on.
2
Turn the AutoNav on and then ARM it.
3
Push the right joystick to the full forward position and turn the left pontoon on.
4
After 2 beeps from the ESC, quickly move the left joystick back to center before the 3rd beep.
5
The ESC will emit confirmation tones indicating that it has a new center position.
6
Turn off the left pontoon and repeat the process with the right side to equalize throttle
input.
If the calibration is not in the center the process can be repeated as many times as
needed.
Do NOT leave either joystick in the full forward position after the 2 beeps, it will put the ESC
into programming mode allowing you to change the factory settings.
Rev:
03
/
25
/202
1
