Website: www.seada.co.uk
19 / 26
4.4.5 Compare Setting
This item is used for comparing the RS232 feedback commands. When trigger button to
send RS232 command to the third-party device, the device will send back a feedback
command. If we add the correct command in the data box, the SDCP9 will compare it
with the received feedback command to verify the availability of sending command. The
compare setting showed as below:
Operation procedure:
1)
Select the key action in action list.
2)
Select the RS232 port.
3)
Set the command format ASCII or Hex, and then set the terminator for ASCII.
4)
Type the correct RS232 command in data box, and then press “add” to save the
command.
5)
Add an event that the LED lights up to indicate the comparison result.
6)
The executing priority of events in event list is from top to bottom, so that the
comparing function can be used for the key action which with three or more events.
Enter the correct commands,
please don’t miss any character.
