G44 HDMI User Guide
4.2.
Advanced Switch
The
Advanced Switch
tab will repeatedly send a batch of matrix selection commands at the interval
time specified in
‘
Send cmd Periodically
’
1.
Select one or more outputs.
2.
Select one input.
3.
Use the arrow button (-->) to assign that input to the selected output or outputs.
4.
When all required selections have been set up, click the Start button to run the commands.
The available options are:
•
All outputs send combined
–
Include all outputs that have the content from the same input
as a single command.
•
When others finished, start a next loop
–
Wait for all commands in the previous action having
been completed before sending the next batch of commands.
•
Stop cmd after one loop
–
Only send the commands only once, no looping.
•
Select all outputs
–
Selects all outputs when checked. Unselects all outputs when unchecked.
•
Start
–
Begin the command cycles.
•
Stop
–
Stop the command cycles.
