30
Fitness function: step counter
The Apnea computer features a convenient step counter that is activated by an
accelerometer inside the device, and special software, that when set with the
user's information (height, weight and age), manages all data for the run or walk
with considerable accuracy.
Step counter settings:
From the main screen (watch), press LR twice, and then LL once: set the
HEIGHT on the appropriate screen and confirm by pressing LL. The next screen
is WEIGHT, followed by AGE. In both cases confirm pressing by LL.
LAYOUT PEDOMETER SET
Press LL and LR together to return to the step counter screen. You can begin
using it without any other steps required.
•
WARNING!
The step counter (STP) will show a slight delay, remaining at zero,
during the first few steps. This is because the system has to register the
movements and adjust to the correct measurement. Once it has done this,
it will also show the steps that were not displayed immediately.
Pressing the LR button once will switch to the EXS TIME screen that
shows time elapsed since it was launched. Pressing LR again will pull up
CAL, indicating the count of calories burned so far. Finally, pressing LR
will show the distance traveled.
To stop using the step counter and return to the watch screen, press HR. RESET
PEDOMETER will appear. Confirm YES by pressing the adjacent LL button.
Summary of Contents for APNEA
Page 36: ...36 NOTES ...
Page 37: ...APNEA 37 NOTES ...