Sea&Sea YS-D3, Instruction Manual

Page: 14 / 34

● The number of times a digital cameraʼs bult-in flash will fire differs among
models. Depending on the number of pre-flashes, mode switch settings
can differ, so check settings before shooting by conducting test flashes.
“To check the mode switch”(P.E-23)
● [ ] and [ ] have exactly the same performance when the strobe is
connected with a sync cord.
● When 30 minutes has passed from turning on the power, or last emission
of the strobe, the power will turn off automatically (auto power-off). When
turning on the power again, set the mode switch to [OFF] before setting the
desired mode.
● In TTL mode, mode status set at the time of power off is saved, and
therefore, if the power is turned off while the unit is set to SLAVE-TTL
mode , the unit will start up in SLAVE-TTL mode at next power up.
33