Attaching and Detaching the Port
E-11
Only the optional ports designed for SEA&SEA digital SLR camera housings can
be attached to this product.
Ports have different depth rating. Check the depth rating for each before use.
This product is delivered with a housing body cap attached to the port mount.
Make sure to remove the housing body cap when attaching the port.
The housing body cap has no watertight capability.
When attaching the port to the housing, always refer to the instruction
manual provided.
CAUTION
In order to use this product underwater, the optional port for the camera
lens must be attached to this product.
Attaching the port
1
2
Lever Lock on the front case
by sliding it in the direction of
the arrow as shown in the
diagram, and rotate the Port
lock lever toward OPEN (in a
counterclockwise direction)
until it stops
Align the positioning mark( )
on the front case with the
positioning mark( ) on the
port, insert the port into the
front case, and then rotate the
port in a clockwise direction
until it stops
3
Make sure that the positioning
mark( ) on the front case and
the positioning mark( ) on the
port are aligned
Before attaching the port, make sure
there are no specks of dust, scratches,
or deformities on the O-ring and the
O-ring contact surfaces.
CAUTION
Lever Lock
Port lock
lever
Positioning
mark
