Sea&Sea MDX-7D Instruction Manual Download Page 23

Page: 23 / 31

Connecting the Strobe

With the YS converter

E-22

Remove the two screws from

the grip for your left hand,

and then remove the parts

(bracket shoe / lanyard hook)

Fit the YS converter attachment

plate in between the grip and

the parts you removed, and

then fasten it in place with the

screws included with the YS

converter

Connect the YS converter's

connecting cable to the YS

converter connector



Refer to the instruction manual

provided with the YS converter

for details.

CAUTION



Refer to the instruction manual provided with the strobe and the YS converter

for connection of the YS converter to the strobe.



Using incompatible strobes in combination with the YS converter may result

in incorrect operation or cause the camera and strobe to malfunction.



If not connecting the YS converter, do not remove the connector cap from

the YS converter connector. Make sure the cap is firmly secured to avoid

water leakage due to a loose cap.



After the equipment is connected to the housing, make sure to check that

the connected strobe and YS converter function correctly before underwater

use.

Bracket shoe

Lanyard hook

YS converter

Connecting

cable

YS converter connector

Mounting

plate

Grip

Summary of Contents for MDX-7D
































Search results

Summary of Contents for MDX-7D

Reviews:

Brands by name

Popular brands

Sea&Sea MDX-7D, Instruction Manual

Search results

Summary of Contents for MDX-7D

Reviews:

Brands by name

Popular brands