2
IMPORTANT SAFETY INFORMATION
Clean and grease parts in movement (wheels, counter-connecting rod, release, etc.)
Check for corroded parts and replace if necessary
Check if the screws and all mounting hardwares are properly tighten
Check the conditions of wear and tear of the devices in movement
Check the correct drain of the rainwater
Check the integrity of the connection cables
Inspect the track for any signs of cracking or separation
Ensure that the gate moves freely
Y
EARLY
Y
EARLY
Y
EARLY
Y
EARLY
Y
EARLY
Y
EARLY
Y
EARLY
Y
EARLY
Check and confirm the proper operation of all safety devices (photocells, edge sensors etc)
Check and confirm the operation of all installed accessories
Check and confirm the operation of the manual release
Check the battery conditions and be sure that connections are free of corrosion
Verify the functionally of the battery backup, or power failure option
GENERAL SAFETY PRECAUTIONS
The following precautions are an integral and essential part of the product and must be supplied to the user;
Read them carefully as they contain important indications for the safe installation, use and maintenance.
1.
These instruction must be kept and forwarded to all possible future users of the system.
2.
This product must be used only for that which it has been expressly designed.
3.
Any other use is to be considered improper and therefore dangerous.
4.
The manufacturer cannot be held responsible for possible damage caused by improper or unreasonable use.
5.
Avoid operating in the proximity of the hinges or moving mechanical parts.
6.
Do not enter the path of the moving gate while in motion.
7.
Do not obstruct the motion of the gate as this may cause a situation of danger.
8.
Do not allow children to play or stay within the path of the moving gate.
9.
Keep remote control or any other control devices out of the reach of children, in order to avoid possible involuntary
activation of the gate operator.
10.
In case of break down or malfunctioning of the product, disconnect from the main power source. Do not attempt to
repair or intervene directly, contact only qualified personnel for repair.
11.
Failure to comply with the above may create a situation of danger.
12.
All cleaning, maintenance or repair work must be carried out by qualified personnel.
13.
In order to guarantee that the system works efficiently and correctly it is important to have the manufacturer's
instructions on maintenance of the gate and operator carried out by qualified personnel.
14.
In particular, regular checks are recommended in order to verify that the safety devices are operating correctly.
All installation, maintenance and repair work must be documented and made available to the user.
IMPORTANT SAFETY INSTRUCTIONS
WARNING – T
O
REDUCE
THE
RISK
OF
INJURY
OR
DEATH
:
1.
R
EAD
AND
FOLLOW
ALL
INSTRUCTIONS
.
2.
Never let children operate or play with gate controls. Keep the remote control away from children.
3.
Always keep people and objects away from the gate.
N
O
ONE
SHOULD
CROSS
THE
PATH
OF
THE
MOVING
GATE
.
4.
Test the gate operator monthly. The gate
MUST
reverse on contact with a rigid object or stop when an object
activates the non-contact sensors. After adjusting the force or the limit of travel, retest the gate operator. Failure to
adjust and retest the gate operator properly can increase the risk of injury or death.
5.
Use the emergency release only when the gate is not moving
6.
K
EEP
GATES
PROPERLY
MAINTAINED
.
Read the owner’s manual. Have a qualified service person make repairs to
gate hardware.
7.
The entrance is for vehicles only.
P
EDESTRIANS
MUST
USE
SEPARATE
ENTRANCE
.
8.
Every gate operator installation
MUST
have secondary protection devices agains entrapments, such as edge
sensors and photo beams more in particulary in places where the risk of entrapments is more likely to occur
9.
S
AVE
THESE
INSTRUCTIONS
PERIODIC MAINTENANCE
TURNING OFF THE POWER
BY MAIN SOURCE TURNED-OFF
TURNING ON THE POWER
!
Y
EARLY
Y
EARLY
Y
EARLY
Y
EARLY
Y
EARLY
A
LL
THE
ABOVE
DESCRIBED
OPERATIONS
MUST
BE
MADE
EXCLUSIVELY
BY
AN
AUTHORIZED
INSTALLER