SEA FLIPPER 110V, Fitting Instructions And Security Advices

Page: 6 / 16

Fig. 9
Fig. 11
Fig. 12
Fig. 10
A
B
0 m
8
m
42 mm
MOUNTING PLATE ATTACHMENT AND MOUNTING OF THE MOTOR
- Attach the mounting plate to the pilaster with 4 screws and 4
washers not included (Fig. 9).
- Make sure that the plate is in horizontal position (with level).
- Mount the motor on the plate using the 2 furnished screws.
- The two articulated arms must be assembled differently, distinguishing the right arm from the left one.
See Fig. 11 and 12.
Note : Before inserting the pivots lubricate them with water repellent grease
ASSEMBLING OF THE ARTICULATED ARM
RIGHT HAND MOUNTING
LEFT HAND MOUNTING
PIVOTS
PIVOTS
International registered trademark n. 2.777.971
REV 00 - 03/2009 6