Sea Tel 6006C, Quick Start Manual

Page: 4 / 8

Field Service Procedure - Replacement Pol Pot Kit, 6006C, 6009C,
9597B & 9507
Page 3 of 7
Document No
135302 Rev B
Copyright © Sea Tel, Inc 2011 - The information contained in this document is proprietary to Sea
Tel, Inc.. This document may not be reproduced or distributed in any form without prior written
consent of Sea Tel, Inc.
6. Pol Pot Replacement Procedure:
6.1. Tools.

Snips/Cutters

9/64” Allen Wrench/Key

3/32” Allen Wrench/Key

12mm Wrench/Spanner

Loctite 222, 242 and 638

Cable Ties
6.2. Procedure.
Procedure for replacing the Pol Pot on the 6009C, 9597B and 9507 linear C ‐ Band systems, Sea Tel kit part number:
134919 (pot part number: 115425 ‐ 5).
*CAUTION: Power down the pedestal before following this
procedure.
1. Cut the cable ties securing the pol pot harness.
2. Disconnect the pol pot IDC connector from the termination
block.
3. Using a 9/64” Allen wrench, remove the pot assembly from the
feed.