Connect the quick con-
nector at the end of the
power cord into the
quick connector at-
tached to the pump.
To connect the pump to
a 12V battery, use the
cord with alligator clips
at the end of the exten-
sion cord. Connect the
red clip to the positive
pole and the black clip
to the negative pole.
WARNING:
Always
connect red clip to the
positive pole and the
black clip to the nega-
tive pole. Cross con-
necting wires could
damage both the pump
and boat.
IThe portable battery is
optional, if you ordered
it, connect the battery
to the quick connector
on the pump.
To charge the portable
battery, plug it into the
charger and then plug
the charger into a
household electrical
outlet.
The light on the battery
charger will blink red
until fully charged.
When it is fully charged
the light will be a solid
green.
Press the ON button to
begin inflation. The
pump operates in two
stages which can be
identified by the noise
of the turbine at the
start, followed by the
piston.
The pump automati-
cally stops once the
pressure is reached.
Air compressors that
are designed for other
uses like tire inflation
(usually around 50 PSI)
can easily harm your
Sea Eagle which has a
much lower working
pressure. It’s for this
reason we recommend
only using Sea Eagle
electric pumps.
5
393RL Kayak |
INFLATION:
INFLATION:
Valves & Pumps
