7
SeaEagle.com/Instructions
When ready to inflate,
insert the adapter into
the valve, turn it to
the right until it is fully
seated and then begin
inflation.
*Valve stem should be
in the
up
position.
The pressure gauge
will not begin to register
until the board begins
to get pressurized.
Pump until the working
pressure of between 12
and 15 PSI is reached.
Do not exceed 15 PSI
when inflating.
Skegs
Three skegs are
included with the board.
Any combination of
skegs can be used
inserted into the bases
on the underside of the
board.
Slide the skeg into the
base and secure with
the clip. If a skeg will
not slide into its base,
do not force it. Refer
to instructions page
11. The bases have
strings attached so the
skegs can be tied to the
board.
Stand Up Paddle
This three-part paddle
has a T-handle, shaft
and blade. Insert the
blade into the shaft
and align the hole
with the button to lock
in place. Insert the
T-handle and adjust
to the desired length
using the locking nut.
Carbon Fiber SUP
(OPTIONAL)
This three-part paddle
has a carbon fiber
T-handle, shaft and
blade section. Insert
blade into the shaft
and align the hole with
button.
Insert the T-handle and
adjust to the desired
height. Lock with the
thumb lock.
Paddle Pocket
The paddle pocket at
the front of the foot
pad. Insert the blade
when carrying the
board or walking into
the surf.
Deluxe Kayak Seat
(OPTIONAL)
The Deluxe Kayak
Seat (DKS) has two
internal bladders, two
white one-way valves
and two blue straps
with clips for securing
the seat to the D-rings
onto the EVA foam
Diamond Deck Pad.
