FSK Canopy (CPW) with Solar Panel
Canopy:
1 - Canopy Canvas
2 - Side Rod with straps and locking buttons
2 - Curved Bar with button holes
Hardware:
2- 35mm x M6 screws
2- knobs
Panel:
1 - Panel with overcharge protector
1 - Extension cord
4 - 1 ¼” hex head screws
4 - Three arm knobs
3 - Cable ties
Canvas and Frame Assembly
Lay out the canvas so it is upside down (shiny side up) and the sleeves are visible at the front
and rear of the canvas. Lay the front curved bar on top with the button holes facing up. The
holes for the rear bar must face down. Then slide the bars into the sleeves.
