Rotate 180
o
to close
Fig.11
Note: To charge a battery outside of the unit, simply
connect to the charger , then plug the charging adapter
into the mains. When the battery is charged, unplug the
adapter first then the battery.
To replace a flat battery with a fully charged battery.
1. Follow the steps 1 to 6 on page 10, to open the
SEASCOOTER
™
.
2. Unplug the battery at the socket by pressing the
locking feature shown in fig. 7 on page 11.
3. Remove the flat battery.
4. Install and connect the charged battery in the correct
position - the leads of the battery must be oriented as
shown on the sticker on the battery, see fig. 12.
5. Follow steps 14 to 19 on page 12, to close the
SEASCOOTER
™
.
Buying batteries
Additional standard or extended batteries can be
purchased separately. Contact your dealer to purchase
them.
14
15
Fig.12