manualshive.com logo in svg

Sea-doo SAR 2018 Series, Operator'S Manual

The Sea-doo SAR 2018 Series is a powerful and versatile watercraft designed for Search and Rescue operations. To operate it safely and efficiently, make sure to download the free Operator's Manual from manualshive.com. This comprehensive manual provides all the necessary instructions and information you need for a successful mission.

Share
Download
background image

FUELING

Fueling Procedure

WARNING

Fuel is flammable and explosive
under certain conditions. Always
work in a well ventilated area. Do
not smoke or allow open flames or
sparks in the vicinity.

1. Turn off engine.

WARNING

Always stop the engine before re-
fueling.

2. Do not allow anyone to remain on

the watercraft.

3. Tie watercraft securely to the fuel-

ing pier.

4. Have a fire extinguisher close at

hand.

5. Open the front storage compart-

ment cover.

6. Locate fuel tank cap.

smo2011-003-011_a

TYPICAL - FUEL TANK CAP LOCATION

1. Fuel tank cap (front storage cover open)

7. Slowly unscrew the fuel cap coun-

terclockwise.

WARNING

Fuel tank may be pressurized, fuel
vapors may be released while re-
moving the fuel tank cap.

8. Insert the gas pump spout into the

filler neck and fill up the fuel tank.

WARNING

To prevent fuel back-flow, fill tank
slowly so the air can escape from
the fuel tank.

9. Stop filling immediately after the re-

lease of the gas pump nozzle handle
and wait a moment before remov-
ing the spout. Do not retract the gas
pump nozzle to put more fuel in fuel
tank.

WARNING

Do not overfill or top off the fuel
tank and leave the watercraft in the
sun. As temperature increases,
fuel expands and may overflow.

10. Reinstall fuel tank cap and fully

tighten it clockwise.

WARNING

Always wipe off any fuel spillage
from the watercraft.

11. After refueling, always open the

seat and ensure there is no gaso-
line vapor odor inside the engine
compartment.

WARNING

Do not start watercraft if gasoline
or gasoline vapor odor is present.

24

_______

SAFETY INFORMATION

________

Summary of Contents for SAR 2018 Series





































































































































































Reviews:

No comments

Related manuals for SAR 2018 Series

MACGREGOR 26 Owner'S Instructions Manual preview
26
Brand: MACGREGOR Pages: 22
Highfield Classic 260 Owner'S Manual preview
Classic 260
Brand: Highfield Pages: 34
Dehler 25 CR Owner'S Manual preview
25 CR
Brand: Dehler Pages: 39
True Course Yachting Linssen DS 45' Owens Manual preview
Linssen DS 45'
Brand: True Course Yachting Pages: 28
Nauticstar 193 SC Owner'S Manual preview
193 SC
Brand: Nauticstar Pages: 86
SEABOB CAYAGO F7 Operation Manual preview
CAYAGO F7
Brand: SEABOB Pages: 82
Tige 2015 ASR Owner'S Manual preview
2015 ASR
Brand: Tige Pages: 111
BENETEAU First 44.7 Owner'S Manual preview
First 44.7
Brand: BENETEAU Pages: 24
Walker Bay RID 275H Assembly Instructions preview
RID 275H
Brand: Walker Bay Pages: 4
Yamaha WaveRunner XL800 Owners/Operaators Manual preview
WaveRunner XL800
Brand: Yamaha Pages: 126
Yamaha FZR 1800 Owner'S Manual preview
FZR 1800
Brand: Yamaha Pages: 104
Yamaha WaveRunner SUPERJET 700 2002 Owner'S/Operator'S Manual preview
WaveRunner SUPERJET 700 2002
Brand: Yamaha Pages: 112
Yamaha FX140 Service Manual preview
FX140
Brand: Yamaha Pages: 868
KAYACAT PUMA Assembly Instructions Manual preview
PUMA
Brand: KAYACAT Pages: 26
Williams Minijet 280 Owner'S Handbook Manual preview
Minijet 280
Brand: Williams Pages: 11
Williams Minijet Owner'S Handbook Manual preview
Minijet
Brand: Williams Pages: 24
Rotax 2005 717 RFI Engine Shop Manual preview
2005 717 RFI
Brand: Rotax Pages: 117
RYDS F 468 Sport Owner'S Manual preview
F 468 Sport
Brand: RYDS Pages: 56

Brands by name

Popular brands

Load more brands