Sea-doo Bombardier GSX Limited 5625, Shop Manual

Page: 34 / 56

Section 02 COOLING SYSTEM
Subsection 01 (CIRCUIT)
02-01-2
Bleeding of the cooling system is accomplished
by the bleed hose located at the uppermost point
of the circuit at the tuned pipe. The bleed hose
also serves as the Cooling System Indicator (CSI).
1. Bleed hose
TYPICAL
Water Flow Regulator Valve
The water supply of the water flow regulator is
provided by the water jacket of the tuned pipe
head.
1. Water supply of the water flow regulator valve
The lower hose of the valve is the water supply
and the upper hose is the regulated injection wa-
ter for the tuned pipe.
1. Water supply from tuned pipe water jacket
2. Regulated injection water to the tuned pipe
3. Muffler
-
CAUTION
When servicing the hull, always rotate wa-
tercraft CLOCKWISE (seen from rear). Rotat-
ing the watercraft on the opposite side could
allow residual water in the tuned pipe to en-
ter the engine.
1
F06E0BA
max. 90 °
F06L0GA
1
F06E09A
F06E0CA
2
1
3
www.SeaDooManuals.net