Sea-doo 2004 GTX 4-TEC Supercharged 6159 Operator'S Manual Download Page 131 | Manualshive

Page: 131 / 139

background image

Owner’s Warranty Responsibilities

As the personal watercraft owner, you are responsible for the performance of the
required maintenance listed in your Operator’s Guide. BRP recommends that
you retain all receipts covering maintenance on your personal watercraft engine,
but BRP cannot deny warranty solely for the lack of receipts or your failure to
ensure the performance of all scheduled maintenance.

As the personal watercraft engine owner, you should however be aware that BRP
may deny you warranty coverage if your personal watercraft engine or a part has
failed due to abuse, neglect, improper maintenance or unapproved modifications.

You are responsible for presenting your personal watercraft engine to an autho-
rized BRP dealer as soon as a problem exists. The warranty repairs will be com-
pleted in a reasonable amount of time, not to exceed 30 days.

If you have any questions regarding your warranty rights and responsibilities or for
the name and location of the nearest authorized BRP dealer you should contact
the Consumer Services Group at 1-715-848-4957.

* In the USA, products are distributed and serviced by BRP US Inc.

©

2004 Bombardier Recreational Products Inc. All rights reserved.

®

Registered trademark and

TM

trademark of Bombardier Recreational Products

Inc.

130

_____________________

www.SeaDooManuals.net

«
...
129
130
131
132
133
...
»

Summary of Contents for 2004 GTX 4-TEC Supercharged 6159












































































































































Reviews:

No comments

Related manuals for 2004 GTX 4-TEC Supercharged 6159

Brand: MACGREGOR Pages: 24

WaveRunner GP1300R

Brand: Yamaha Pages: 340

WaveRunner GP1300R

Brand: Yamaha Pages: 60

WaveRunner GP1200R

Brand: Yamaha Pages: 245

Brand: Yamaha Pages: 60

Brand: Yamaha Pages: 126

Brand: Yamaha Pages: 118

50 Bow Rider 2022

Brand: YAMARIN Pages: 94

WaveRunner VX110 Deluxe

Brand: Yamaha Pages: 26

WaveRunner GP1200R

Brand: Yamaha Pages: 24

waverunner xlt800

Brand: Yamaha Pages: 60

WaveRunner GP1300R

Brand: Yamaha Pages: 48

WaveRunner SuperJet 2009

Brand: Yamaha Pages: 74

WaveVenture WVT700BW

Brand: Yamaha Pages: 103

WaveRunner VX Cruiser 2007

Brand: Yamaha Pages: 96

WaveRunner XL XL700Y

Brand: Yamaha Pages: 105

WaveRunner XL XL700X

Brand: Yamaha Pages: 107

WaveRunner XL700 2004

Brand: Yamaha Pages: 120

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands