14
CAUTION:
Antifreeze mix must be
fed in cooling system. Otherwise re-
maining water will freeze. This opera-
tion requires a good technical knowl-
edge of the cooling system path. If
antifreezing is not performed ade-
quately engine/exhaust system may
freeze and cause severe engine dam-
age. We strongly recommend this op-
eration be performed by an autho-
rized SEA-DOO dealer.
CAUTION:
Always use ethylene gly-
col antifreeze containing corrosion
inhibitors specifically recommended
for aluminum engines.
NOTE:
When available, it is recom-
mended to use biodegradable anti-
freeze compatible with internal com-
bustion aluminum engines. This will
contribute to protect the environment.
NOTE:
The engine will not have to run
during this operation but should have
been ran before, to exhaust as much
water as possible, from cooling sys-
tem components.
NOTE:
It may be easier to reach hoses
when you remove the seat opening
bridge.
1. Seat opening bridge
Hose Pinchers Installation
Some hoses have to be plugged to
prevent draining, before filling cooling
system jackets with the antifreeze.
Install hose pinchers at the following
location:
1. Water outlet hose
F18L0MY
1
1
F18E05Y
smo2002-005a.book Page 14 Friday, September 7, 2001 11:34 AM
www.SeaDooManuals.net
Summary of Contents for 2002 GTX DI
Page 1: ...www SeaDooManuals net ...
