Sea-doo 2001 GTX Operator'S Manual Download

Page: 79 / 148

F01L5JY

Grab the grab handle and pull yourself
upward until your knee can reach the
boarding platform then grip the seat
strap.

F01L4JY

Bring your feet on the footboard while
maintaining balance.

F01L4KY

Sit astride the seat.

Operator with a Passenger

The operator climbs on the watercraft
the same way as explained previously.

In choppy water, the passenger, while
in the water, may hold the water-
craft to help the operator in climbing
aboard.

F01L4MY

The passenger then climbs on the wa-
tercraft while the operator maintains
balance by sitting as close as possible
to the console.

F01L4NY

F01L4OY

Starting

Preparation

Before unloading the watercraft from
the trailer, it can be started for about
10 seconds to verify proper operation.

_____________________

Summary of Contents for 2001 GTX





















































































































































Search results

Summary of Contents for 2001 GTX

Reviews:

Related manuals for 2001 GTX

Brands by name

Popular brands

Sea-doo 2001 GTX, Operator'S Manual

Search results

Summary of Contents for 2001 GTX

Reviews:

Related manuals for 2001 GTX

Brands by name

Popular brands