Page 11
Sleep Mode
Timer: Set Auto Start/Off
Follow Me
SLEEP MODE:
The temperature setting will increase (Cooling mode) or
decrease (Heating mode) by 2°F in 30 minutes. In another
30 minutes the temperature setting will increase/decrease
by another 2°F.
This temperature will be maintained for 6 hours and then
the temperature will return to the original set point
temperature.
To cancel the sleep mode, press the "Sleep" button.
TIMER ON / TIMER OFF:
Press the Timer button to select "On or Off". After the
time is selected the unit will either turn on or off after
the timer has timed out.
Example:
If the unit is operating and "Off' is selected the unit will
turn off after the selected time times out.
If the unit is off and "On" is selected the unit will turn
on after the selected times out.
Press or hold the UP or DOWN button to change the
Auto time by 0.5 hour increments up to 10 hours, then
at 1 hour increments up to 24 hours. The control will
count down the time remaining until unit starts or
stops.
The selected time will update in 5 seconds. The
system will automatically revert back to display the
previous temperature setting or room temperature
when the unit is on. (When the unit is off, there is no
display.)
Turning the unit ON or OFF at any time or adjusting
the timer setting to 0.0 will cancel the Auto Start/Stop
timed program.
FOLLOW ME:
This function can be activated by the remote control
only. The remote control works as a remote
thermostat allowing for the precise temperature
control at its location.
To active the Follow Me function, point the remote
control towards the unit and press the Follow Me
button.
The remote display is actual temperature at its
location. The remote control will send this signal to
the air conditioner at 3 minutes intervals until the
follow me button is pressed again. The air conditioner
will beep to indicate the FOLLOW ME feature has
ended if it does not receive the signal during any 7
minutes interval.
Light Flashing