Section 11 General information
Revised editions of this user manual are on the manufacturer's website.
11.1 Service and support
The manufacturer recommends that sensors be sent back to the manufacturer annually to
be cleaned, calibrated, and for standard maintenance.
Refer to the website for FAQs and technical notes, or contact the manufacturer for
support at [email protected].
Do the steps below to send a sensor back to the manufacturer.
1.
Complete the online Return Merchandise Authorization (RMA) form or contact the
manufacturer.
Note: The manufacturer is not responsible for damage to the sensor during return shipment.
2.
Remove all batteries from the sensor, if so equipped.
3.
Remove all anti-fouling treatments and devices.
Note: The manufacturer will not accept sensors that have been treated with anti-fouling
compounds for service or repair. This includes AF 24173 devices, tri-butyl tin, marine anti-
fouling paint, ablative coatings, etc.
4.
Use the sensor's original ruggedized shipping case to send the sensor back to the
manufacturer.
5.
Write the RMA number on the outside of the shipping case and on the packing list.
6.
Use 3rd-day air to ship the sensor back to the manufacturer. Do not use ground
shipping.
7.
The manufacturer will supply all replacement parts and labor and pay to send the
sensor back to the user via 3rd-day air shipping.
11.2 Waste electrical and electronic equipment
Electrical equipment that is marked with this symbol may not be disposed of in European public
disposal systems. In conformity with EU Directive 2002/96/EC, European electrical equipment
users must return old or end-of-life equipment to the manufacturer for disposal at no charge to
the user. To recycle, please contact the manufacturer for instructions on how to return end-of-
life equipment, manufacturer-supplied electrical accessories, and auxiliary items for proper
disposal.
11.3 China RoHS disclosure table
Name of Part
Hazardous substance or element in product
Lead
(Pb)
Mercury
(Hg)
Cadmium
(Cd)
Hexavalent
Chromium
(Cr(VI))
Polybrominated
biphenyls
(PBB)
Polybrominated
diphenyl ethers
(PBDE)
PCBs
X
O
O
O
O
O
Battery pack
X
O
O
O
O
O
Cables
X
O
O
O
O
O
Housing
O
O
O
O
O
O
Cage
O
O
O
O
O
O
This table is compiled to the SJ/T 11364 standard.
O: This hazardous substance is below the specified limits as described in GB/T 26572.
X: This hazardous substance is above the specified limits as described in GB/T 26572.
61
Summary of Contents for SBE 25plus
