13
12
MANUFACTURER´S
DECLARATIONS:
M-A2 AMP can only be used for M-A2 Column and M-A2 SUB.
SPECIFICATIONS:
SPECIFICATIONS:
Dimensions (W × H × D) :
Weight:
Power Output
(RMS)
:
Indicators:
Input / Output:
Ampilifer Type:
Signal Processing:
Protection:
M-A2 AMP
Controls:
483 × 66 × 347 mm
6.5 kg
On, signal, limit, protect
Input Neutrik XLR / Link-output Neutrik XLR, speaker out Neutrik NL- 4
Class D amplifier, SMPS
DSP, 48 kHz, 24 bits
Multiple limiter, short circuit, overheating
On / Off switch, Main level, sub level
Sub: 400 W (200 W ×
2) , Column: 400 W ((100 W + 100 W)
×
2)
Input Sensitivity:
- 13.2 dBV
regarding the branded product you have purchased.
In the unlikely event that your product has a recurring failure, , at its discretion, may elect to
component parts or hardware products removed under this limited warranty become the property of .
ferable to anyone who obtains ownership of the branded product from the original purchaser. During
the limited warranty period, will repair or replace the defective component parts or the product. All
does not warrant that the operation of this product will be uninterrupted or error-free. is not
provide you with a replacement unit of ’s choice that is at least equivalent to your branded
This limited warranty extends only to the original purchaser of this branded product and is not trans-
warrants that the product you have purchased from or from an authorized reseller is free
independent warranty claims towards .
LIMITED
WARRANTY
This limited warranty applies to the branded products.
The statutory warranty rights towards the seller are not affected by this guarantee. In fact, it
justifies
additional
from defects in materials or workmanship under normal use for a period of 1 year from the date of purchase.
The limited warranty period starts on the date of purchase. In order to receive warranty services, you are required
to provide proof of the purchase date. Your dated sales or delivery receipt, showing the date of purchase, is your
proof of the purchase date. Should products of the brands named above be in need of repair within the limited war-
ranty period, you are entitled to warranty services according to the terms and conditions stated in this document.
product in hardware performance.
responsible for damage that occurs as a result of your failure to follow the instructions included with the
branded product.
This limited warranty does not apply,
-
to wear parts (e.g. accumula
tor)
-
to any product from which the serial number has been removed or that has been damaged or rendered defec-
tive as the result of an accident
-
in case of, misuse, abuse, or other external causes
-
by operation outside the usage parameters stated in the user’s documentation shipped with the product
-
by use of spare parts not manufactured or sold by
-
by modific
ation or service by anyone other than
These terms and conditions constitute the complete and exclusive warranty agreement between you and
www.se-audiotechnik.co.kr
www.se-audiotechnik.co.kr
www.se-audiotechnik.com
www.se-audiotechnik.com
