4
Signal-to-noise ratio
85 dB
Low cut filter
80 / 160Hz, 6 dB/Oct, switchable
Attenuation pad
10 / 20 dB, switchable
Powering
48 Volts according to IEC 61938
Electrical Impedance
125 Ohms
Recommended load impedance
>1k Ohms
Current consumption
6 mA
Connectivity
3-pin male XLR connector
Dimensions
Diameter: 58 mm (2.28 in.) Length 169 mm (6.65 in.)
Weight
440 g (15.52 oz.)
Frequency response
Polar Pattern
Support
In case you are experiencing any problems or have any questions regarding your sE product,
please contact your dealer first for the fastest and more direct service. If an authorized service is
required, it will be arranged by that dealer:
http://www.seelectronics.com/dealers
If you still have difficulties with support or assistance, please do not hesitate to contact us directly:
http://www.seelectronics.com/contact-us
Lastly, remember to register your new gear to extend your warranty to a full three years:
http://www.seelectronics.com/registration
Contact
Feel free to contact us:
sE Electronics International, Inc.
www.seelectronics.com
PO Box 1049
6 Beach Road
Tiburon
CA 94920 USA
Our international distributors & sales representatives:
http://www.seelectronics.com/contact-us
This product conforms to the standards listed in the Declaration of Conformity. Please contact us
if you want to order a free copy of the Declaration of Conformity. Technical data subject to change
without notice.
Summary of Contents for X1 S
Page 1: ...1 X1 S User Manual ...