SE Electronics sE2300, User Manual, Page: 4 / 32

4
Sensitivity 24 mV/Pa (-32.5 dBV)
Max. SPL (0.5% THD) 126 / 136 / 146 dB
SPL
(0/10/20 dB Attenuation pad)
Equivalent noise level 9 dB(A)
Dynamic range 117 / 127 / 137 dB (0/10/20 dB Attenuation pad)
Signal-to-noise ratio 85 dB
Low cut filter 80 / 160 Hz, 6 dB/Oct, switchable
Attenuation pad 10 / 20 dB, switchable
Powering 48 Volts according to IEC 61938
Electrical Impedance 40 Ohms
Recommended load impedance >1k Ohms
Current consumption 4.8 mA
Connectivity 3-pin male XLR connector
Dimensions Diameter: 51 mm (2.01 in.) Length 215 mm (8.46 in.)
Weight 611 g (21.55 oz.)
Omnidirectional
Cardioid