SE Audiotechnik I-Line Series, Instruction Manual, Page: 20 / 27

IA 202D / IA 402D Instruction Manual
Revision 3 20
6.3.4.3. Reset User Params
This menu allows to reset user DSP settings for both channels at once as shown in the
section 6.3.3.7 .
6.3.5. Delay Settings
Both IA 202D and IA 402D system amplifiers have maximum delay memory of 1400
samples. As the need of delay is depending on the location of the loudspeakers SE
Audiotechnik engineers introduced “shared delay” concept which allows each channel to
have 3 different delay settings:
•
Bypassed . No delay available for the channel
•
Single . “Single Mode” delay with latency up to 700 samples (1 sample
minimum latency).
•
Double . “Double Mode” delay configuration up to 1400 samples (2 samples
minimum latency). Only one channel can have this configuration. The other
one is bypassed.
Delay Settings menu allows to change delay settings for each channel. The delay
values are displayed in the Table 1. Please note that look-ahead function in the peak
limiter introduces preset dependent latency up to 48 samples. This is not included in
the table since it varies from preset to preset.
Figure 22. Delay Settings Menu.
Channel Status Delay Range Delay
Channel A Channel B Samples Milliseconds Meters Built-In (ms) Total (ms)
Bypassed Bypassed 0 0 0 1.07 1.07
Single Delay Bypassed
1-700 0.021 – 14.583 0.0072 – 5.002 1.07 1.091 – 15.653 Single Delay Single Delay
Bypassed Single Delay
Dual Delay Bypassed
701-1400 14.604 – 29.167 5.009 – 10.004 1.07 15.674 – 30.237
Bypassed Dual Delay
Table 1. Delay Settings Values.
DELAY SETTINGS
Back
CH A CH B
Double < Bypass