Working with PC Applications
Working with PC Applications - Page
- Page 17
17
SPOT 14.4
SPOT 14.4 User's Guide
User's Guide
38GDE00001SCF - Issue 4 (11/96)
38GDE00001SCF - Issue 4 (11/96)
Hayes AT
Hayes AT Autodialled Voice Call Settings
Autodialled Voice Call Settings
If the program you use for autodialling from your PC uses AT commands,
the following settings should work in most cases
(Note:
Note: Some dialling
applications automatically insert the appropriate prefixes and suffixes, eg.
Windows Cardfile)
.
AT Dialling Prefix
AT Dialling Prefix ATDT
AT Hangup Prefix
AT Hangup ++
AT Dialling Suffix
AT Dialling Suffix ;
AT Hangup Suffix
AT Hangup Suffix ATH0
The dialling suffix tells SPOT to switch from modem operation to speech
operation after dialling. If your application does not support a dialling
suffix you have two options. Either set the prefix to ATDTV
ATDTV or add a VV at
the beginning of all telephone numbers.
Most Hayes AT autodialling applications expect to control a modem that
shares a socket with a phone. Thus they do not provide a way of ending
calls, expecting the user to replace the telephone handset to end the call
themselves. The hang-up button of these applications usually just signals
to the application to stop its call timer. These applications cannot end a
SPOT phone call though SPOT has an 'end call' command.
If you want your applications to have total control of SPOT, use a version
of the application that supports TAPI. The application will then integrate
more tightly with all the features of SPOT.