SDJ SG PIXI5WL, User Manual

Page: 19 / 24

19
5. - SETUP
5.1 – MENU
DMX
CHANNEL 002 2 channels mode
CHANNEL 003 3 channels mode
CHANNEL 006 6 channels mode
CHANNEL 012 12 channels mode
ADDRESS (001 – 512) 001 – 512 DMX address
RUN MODE
DMX DMX mode
SLAVE Slave mode
SET UP
ID NUMBER OFF, 001 - 066 ID address
DISPLAY LED ON - OFF
Display backlight
OFF = switch off after 30s
ON = always ON
KEY LOCKS ON - OFF
Keypad lock.
To remove the lock, press in sequence following
buttons: DOWN – UP – DOWN – UP
MAX TEMP 060
Max limit of temperature for LED PCB. When the
working temperature of the light exceeds the
Max temperature, the light intensity is reduced.
DIMMER 000 – 255 Manual setting of maximum value of dimmer
FIXTURE STA ON - OFF
Working off.
ON = the projector works
OFF = the projector is OFF
INFORMATION
SOFTWARE V x.x.x Software version
HARDWARE H x.x.x Hardware version
FIX TIME xxx h – xxx m Working hours indication
AUTO
SPEED 00 – 31 Auto mode: select speed
AUTO MODE 01 – 12 Auto mode: select effect
SOUND
SOUND MODE 01 – 03 Sound mode: select speed
SOUND SENS 00 – 99 Sound mode: select sensitivity
STAT COLO
LED1 – LED12 WW000 – WW255 Manual setting of dimmer for each led
STROBE 000 - 031 Manual setting of general strobe
RESET Reset
5.2 – MASTER/SLAVE MODE
In this mode, more units can be linked together as a single chain and work in a synchronized
way.

Use a DMX cable to link together all the units from the connector DMX OUT to DMX IN.

Define the first unit of the chain as MASTER, all other units must be set in SLAVE mode.

Operate the Master unit in Automatic mode (AUTO) or Sound Mode (SOUND) to operate
the entire system. The entire chain of Slave unit will act as the Master unit.