SDHQ SDHQ-55-1541-G3 Manual Download Page 7

For questions or help with the installation, please call SDHQ Offroad @ 480-633-2929  

Mon.

–Fri. 8:00am–5:30pm and Sat. 8:00am–3:30pm Arizona Time. www.sdhqoffroad.com  

Page 

7

 of 

8

 

 

6. 

Once all the hardware is started, you can tighten everything.  It is recommended to use a jack 
under each mount when tightening.  

Tighten the outer 7/16” bolts first, then tighten the inner 

3/8” bolts.  Once the sliders are tight, reposition and reinstall your gas tank and skid plate. 

 

7. 

For the passenger side, follow the same steps as the driver’s side, except there is no gas tank 
in the way. An Upper Bracket will be used in place of the Gas Tank Mount. On the passenger 
side, there is a plastic cover to protect (2) wiring harnesses. Remove the plastic cover and 
unbolt the mount for the harnesses. The mount and plastic cover may need to be trimmed to fit 
on the truck again once the slider is installed.  

 

 

 

 

8. 

Consistent with 

the driver’s side, get all of the hardware in and started before tightening 

anything. 

Once everything is started and snug, tighten the 7/16” bolts first, then tighten all of 

the 3/8” bolts. Enjoy your new SDHQ Tacoma Sliders! 

 

 

 
 

Summary of Contents for SDHQ-55-1541-G3









Reviews: