For questions or help with the installation, please call SDHQ Offroad @ 480-633-2929
Mon.
–Fri. 8:00am–5:30pm and Sat. 8:00am–3:30pm Arizona Time. www.sdhqoffroad.com
Page
5
of
10
3.
Under each headlight filler, remove (2) 10mm bolts and (2) plastic clips. In each wheel well,
remove (1) 10mm bolt and (1) plastic clip holding the valance on. The valance should now be
able to be removed.
4. (2014-2018)
Remove the (3) 10mm bolts holding the lower part of the plastic bumper to the skid
plate. Remove the (4) 10mm bolts, (1) 12mm bolt, and 1 plastic clip holding the (2) front outer
plastic covers on the bumper.
5.
Unplug fog lights and parking sensors. Remove the (4) 17mm bolts holding the tow hooks on.
Keep these as they will be reused. Using a 14mm and 12mm socket, remove the skid plate.
Keep the 12mm bolts as they will be reused later for the 2
nd
Skid Plate. Remove the (8) 14mm
bolts holding the bumper on. There are (4) bolts on each side, (2) on top and (2) on bottom.
Remove the bumper.
