PATIENT
MONITORING
SYSTEM
Connecting to a Infant/Patient Monitoring System
1. Locate jumper [J6] (above the IBO input). Verify that it is NOT installed across both pins.
2. Close AND hold the REX input. The 101-DE will be in Bypass Mode and will be unlocked.
3. Whenever the IBO input is closed AND held, the 101-DE will immediately relock and rearm.
Egress is possible by activating the Exit Check’s trigger input and initiating the irreversible 15 or 30 second
unlock cycle.
4. Releasing the IBO input will return the 101-DE to the Bypass Mode.
5. Releasing the REX input will rearm the system.
6. Upon power-up, you must manually reset the lock to activate the IBO input.
P:\INSTALLATION INST\Delayed Egress\INST-101DE_KDE.vsd Rev E 07-15 Page 11
Connection to a Infant/Patient Monitoring
System has not been investigated by UL.
PUSH UNTIL ALARM
SOUNDS. DOOR CAN BE
OPENED IN 15 SECONDS.
Standard Exit
Device
No switch
No Power Transfer
TO FIRE COMMAND
CENTER
115 VAC
Door With Latch Assembly –
Activation By Door Movement
Power
Supply
TO PATIENT MONITORING
SYSTEM
Trigger
Switch
-
+
3
4
5
6
7
8
To
Regulated
Power
Supply
101-DE / 101-KDE
PWR LOCK RED RLY
TRIG REX RESET
C NO
C NO
C NO
-
+
-
+
GRN RLY
NO C NC
NO C NC
IBO
C NO
Close to
Override
Bypass
Close &
Hold to
Unlock
1511DE 1575DE
1571DE 1576DE
1581DE
REX
TRIG
RESET
IBO
J4
J6
J1
KEYPAD
RESET
C
NO
C NO
C
NO
C
NO
Jumper must be removed.