Scuderia Ferrari F3000C Manual Download Page 27

Page: 27 / 91

8.0

Toddler Car Seat (

With

Built-in

Harness)

Installation and Use

8.1

Proper Installation

WARNING!

• Proper installation is required.

The proper belt routing for

securing this Car Seat in a

vehicle MUST be used. Top

Tether MUST be used.

•

Secure this child restraint with

UAS System or vehicle seat

belt and Top Tether Strap as

shown in this manual.

•

UAS or vehicle seat belt must

stay tightly adjusted around

Car Seat at all times.

•

UAS or vehicle seat belt must be routed through Back

Support of Car Seat when using Harness system.

•

Buckle Tongues are securely locked into Harness Buckle.

•

Snugly adjust Harness provided with the Car Seat around

child.

•

Harness Straps must be through Harness

strap slots at or

JUST ABOVE

child’s shoulders.

•

Never place UAS or vehicle seat belt in

front of child when using Harness system.

•

Securely belt this Car Seat in

vehicle

, even

when not occupied. An unsecured Car Seat

can injure other occupants in a crash.

Top

Tether

Summary of Contents for Ferrari F3000C




























































































Search results

Summary of Contents for Ferrari F3000C

Reviews:

Related manuals for Ferrari F3000C

Brands by name

Popular brands

Scuderia Ferrari F3000C, Manual

Search results

Summary of Contents for Ferrari F3000C

Reviews:

Related manuals for Ferrari F3000C

Brands by name

Popular brands