6. After you have taken your final accumulated time reading,
press Button
C
to reset display to zero.
To take an intermediate or split-time time readings as an
event progresses:
1. Press Button
D
to start timing.
2. Press Button
C
to read intermediate or split time in Lower
digital display; Chronograph continues to keep timing event
in background.
NOTE: When split-time function is activated, the indicator “SP” will
appear in Upper digital display.
3. Press Button
C
to resume event timing; Lower digital display
advances to show current timing of ongoing event.
4. Repeat steps 2 and 3 to take any additional split times.
5. Press Button
D
to stop timing at end of event; and read final time
in Lower digital display.
6. Press Button
C
and read final time in Lower digital display.
7. Press Button
C
to reset Chronograph to zero.
DAILY ALARM
Watch may be set to sound a CHIME and/or ALARM.
To activate/deactivate ALARM:
1. From Real Time Mode, press Button
B
twice to enter
ALARM Mode.
2. Press Button
D
one or more times to turn ALARM [ ] and/or
CHIME [ ] ON or OFF in this sequence:
ALARM ON
à
CHIME ON
à
ALARM and CHIME ON
à
ALARM
and CHIME OFF.
When ALARM and/or CHIME are activated, their icon(s) will appear
in the Upper digital display.
To set the ALARM:
1. From Real Time Mode, press Button
B
twice to enter
ALARM Mode.
2. Press Button
C
; Hours will blink.
3. Press Button
D
to adjust the blinking number in HOUR field.
4. When correct number appears in blinking display, press Button
C
to confirm HOUR setting; Minutes will blink.
5. Press Button
D
to adjust the blinking number in MINUTES field.
6. When correct number appears in blinking display, press Button
C
to confirm MINUTES setting.
7. Press Button
B
to return to Real Time mode.
To use the Snooze feature:
When ALARM sounds, press button
D
to turn sound OFF; then press
Button
B
to activate or deactivate the SNOOZE feature. When the
Snooze feature is turned ON, the ALARM will sound again 5 minutes
later. If no button is pushed, the ALARM will stop sounding automat-
ically after 20 seconds.
