14
INTRODUCTION
Read this manual thoroughly and carefully before using this demand regulator.
This demand regulator’s manual cannot be treated as a substitution for a specialized
diving training conducted by a certified instructor.
Scubatech demand regulators must be used only in the way as shown in the following
manual.
WARNING
Our demand regulators were tested according to the requirements of EN 250:2003/A1:2006
norm. They are not designed to be used by more than 1 person at a time. Using the demand
regulators by more than 1 person at a time in cold water may result in the fact that the
regulators will not conform with the requirements of EN 250:2003/A1:2006 norm.
WARNING
SCUBA diving may be potentially hazardous for the untrained individual. Therefore, before
attempting to use any SCUBA equipment, an individual must receive training and
certification.
WARNING
Standard versions of our demand regulators cannot be used with gas mixtures with more than
40% of oxygen. Failure to adhere to this warning may result in serious deterioration of the
equipment, user’s serious injury or even user’s death.
It is possible to obtain special set of spare parts making it possible to use the regulators with
pure oxygen or Nitrox.
TECHNICAL SPECIFICATIONS
Threads:
DIN retainer: 5/8”
High pressure: 1 or 2 ports 7/16”
Low pressure: 2 or 4 ports 3/8”
Parameters:
Maximum recommended operating depth: 40m
Supply pressure: 30 MPa = 300 atm
Intermediate pressure: 9,0 – 9,5 atm