SCS PTC-IIex, Manual

Page: 176 / 220

13 The BIOS
13.3.2 FCall
Default setting: none
Parameter: CALL Flash call, max. 8 characters.
Checking and setting of the flash call. By using the
FCall
command, it is possible to
store your own callsign permanently in FLASH ROM.
Stores the flash call DL3FCJ
cmd:
FC
DL3FCJ <Return>
Checking the flash call.
cmd:
FC
<Return>
The flash call is used as default callsign by the PACTOR firmware after a
RESTart
.
13.3.3 FSelcall
Default setting:
none
Parameter: SELCALL Flash-Selcall, max. 4 characters
Checking and setting of the flash selcall. By using the
FSelcall
command, it is
possible to store your own selcall permanently in FLASH ROM.
Stores the flash selcall DFCJ
cmd:
FS
DFCJ <Return>
Checking the flash selcall.
cmd:
FS
<Return>
The flash selcall is used as default selcall by the PACTOR firmware after a
RESTart
.
13.3.4 Help
Displays all useable commands. It is also possible to obtain further help on a command
whilst in BIOS with Help <CMD>.
More details to the
SERbaud
command
cmd:
Help
SERBaud
<Return>
or shortened to:
cmd:
H
SERB
<Return>
13.3.5 OFF
Switches off the PTC-IIex. With signals on the RS232 link the (e.g. one or more
<return>) it switches on again.
13.3.6 RESTart
Reset of the PTC-IIex, same as switched off and on.
162