SCS CTC034-030-3-WW Installation, Operation And Maintenance Manual Download Page 10

TB-9037

 Page 10 of 10

© 2016 DESCO INDUSTRIES, INC.

Employee Owned

SCS 

- 926 JR Industrial Drive, Sanford, NC 27332

East: (919) 718-0000 | West: (909) 627-9634 • Website: 

StaticControl.com

Regulatory Information

China RoHS

Electronic Industry Standard of the People’s Republic of China, SJ T11363-2006, Requirements for 

Concentration Limits for Certain Hazardous Substances in Electronic Information Products

This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, 

SJ/T11364-2006, means that the product or part does contain a substance, as detailed in the 

chart below, in excess of the following maximum concentration values in any homogeneous 

material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or 

polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by SCS in writing, 

this information represents SCS best knowledge and belief based upon information provided by third party suppliers 

to SCS.

Part or Component Name

Hazardous Substances or Elements

(Pb)

(Hg)

(Cd)

(CrVI)

(PBB)

(PBDE)

Solder in instrument

X

O

O

O

O

O

O: Indicates that this hazardous substance contained in all of the homogeneous materials 
for this part is below the limit requirement in the SJ/T11363-2006.
X: Indicates that this hazardous substance contained in at least one of the homogeneous 
materials used for this part is above the limit requirement in the SJ/T11363-2006.

Limited Warranty, Warranty Exclusions, Limit of 

Liability and RMA Request Instructions

See the SCS Warranty - 

http://staticcontrol.descoindustries.com/Limited-Warranty.aspx

Summary of Contents for CTC034-030-3-WW











Reviews: